How to maintain the mesh sleeve on the metal hose of the dis

Writer： admin Time：2021-09-08 21:33 Browse：℃

How to maintain the mesh sleeve on the metal hose of the disc-welded vacuum bellows
It cannot play its original role. The scattered meshes are usually formed by virtual welding. Due to welding problems, the welded part of the corrugated pipe and the steel wire is partially unwelded. After the mesh sleeve is installed in the pipeline, because it cannot withstand the gravity, it will fall off under the action of the pressure, and eventually lead to the failure of the metal hose. Therefore, in order to eradicate these conditions, it is generally necessary to stop the pressure test at the factory. It is formed because the device is not in place, and the unqualified worker does not necessarily understand the metal hose. Therefore, errors may occur. This causes the metal hose to be stretched and twisted. When the limit of the net sleeve is exceeded, it will be scattered and damaged. Therefore, pay special attention to the installation. In fact, most of the problems with metal hoses are products of poor quality, so look for the right track, and arrange professional personnel to stop the device, so as to prevent the occurrence of such a situation as the net cover is scattered. Metal hose products include oil and suction hoses, steam hoses, sandblasting hoses, acid and alkali suction hoses, food hoses, oxygen blowing hoses and various special-shaped hoses. It is widely used in machinery, chemical, petroleum, metallurgy, food and other industries. The model length and connection method of the metal hose can be customized according to the user's request.